High-Purity Silver Sputtering Target (Ag Target) for PVD Coating — Planar & Rotatable, Custom Sizes
Silver (Ag) has low resistivity — approximately 1.59 μΩ·cm at around 20 °C — and good infrared reflectance. It is used in Low-E glass, electronics and functional coatings. Yet high target conductivity does not guarantee stable films — purity, microstructure, substrate and process also matter.
Applications
In Low-E stacks the silver layer is a key functional layer: thickness and dielectric-layer design balance visible-light transmittance and infrared reflectance, while continuity, thickness uniformity and interface quality govern optical and thermal performance. Silver is also used in transparent conductive films, electrodes, flexible electronics and EMI shielding; dielectric/Ag/dielectric stacks can be an alternative to ITO in some films, but not universally.
Factors Affecting Thin-Film Stability
In sulfur environments silver sulfide may form and cause discoloration; stability relies on protective layers, encapsulation and the service environment. On certain substrates silver shows island-type nucleation, and a thin discontinuous film raises sheet resistance, so underlayers and seed layers improve adhesion.
Purity, grain size and microstructural uniformity affect erosion morphology and batch consistency; sputtering power, working pressure and substrate temperature influence grain structure and sheet resistance.
Quality Control and Selection
Quality is judged by composition, microstructure and machining, not purity alone; impurity control follows the grade and application, and microstructure is evaluated with actual equipment rather than "the finer the grains, the better". Low-E production focuses on large-area uniformity and batch consistency, electronic films on resistance and adhesion. Selection considers purity, microstructure, planar/rotatable format and bonding.
Why UVTM
UVTM (UV Tech Material LTD.), based in Huadu, Guangzhou, specializes in PVD sputtering targets and high-purity coating materials — metal/alloy, ceramic/oxide and evaporation types, with planar and rotatable targets, custom sizes and bonding.
Recently Posted
-
Niobium Oxide (Nb₂O₅) Sputtering Targets: Material Properties and Applications in Optical Coatings
November 19, 2026Low-emissivity (Low-E) architectural glass typically uses a multilayer coating structure. Silver provides the primary infrared ref
Read More -
Niobium vs. Niobium Pentoxide Targets: Where the Metal Route and the Ceramic Route Split
November 14, 2026Niobium (Nb) targets and niobium pentoxide (Nb2O5) targets land on the same RFQ often enough that buyers start treating them as on
Read More -
Battery Coating Targets for Energy Storage and EV Battery Applications
November 12, 2026Battery coating targets support thin-film deposition for composite current collectors, solid-state battery interfaces and other en
Read More -
How to Choose a Flat Panel Display Sputtering Target Supplier
November 9, 20261. Check Material CapabilitiesDisplay manufacturing uses transparent conductive oxides (TCOs), oxide semiconductors and metal or a
Read More